How to Solve Sticky Clutch and Brake Caused by Flood

to look out for the car owners. Because the car is often crushed standing water or flooding is potentially having problems with the brakes and clutch.

Canvas clutch or brake is vulnerable sticky on the fly wheel. This could happen because the canvas is made of asbestos, potentially expands and hardens after exposure to water.

If that happens, then the consequences can be dangerous. "Can you imagine what would happen if a car speeding then braked and the car can not run again because of bad brakes,
Therefore, check the device immediately after the car broke through standing water or flooded the wheels. For maximum results, should be overhauled.

"Because the two devices have a vital function for the safety and comfort of driving,

However, if the brake and clutch was sticky before you take it to a repair shop, work out how to handle an emergency. What are some ways that? Here's his explanation

1. Sticky brake

Symptoms of brake sticky or jammed after bulldoze standing water can not be felt shortly after wheel car submerged in standing water or flooding. The signs began to appear after two or three days as the receding water.

"To know the symptoms, release the hand brake lever and turn on the engine and advanced car in reverse. When you feel heavy, sticky brake means, "

There are two ways of emergency to deal with it, before bringing the car to the garage.

a. Jump rodeo
This method is similar to a cowboy taming a wild horse as it is called jump rodeo. The trick, the hand brake lever off. Position the gear transmission in first gear and the clutch pedal.

After that, turn off the engine and the clutch pedal slowly. Keep the car jump or forward shortly after the clutch pedal is released. "Remember, do it the way the terrain to be safe,"

Repeat several times until the brake does not feel sticky anymore.

b. Loud thundering drum
If the first way does not work, you can try the second way, namely by stamping with the brake drum wallop.

The trick, jack the rear wheels. Then remove the wheel and beat the drum a few times with a hammer to brake in the drum is not sticky anymore.

2. Sticky clutch

As well as tackle the sticky brake, there are two ways to remove a sticky clutch.

a. Beat the clutch
The trick, clutch pedal deep a few times. Then the engine off condition, position the transmission in first gear teeth and the clutch pedal.

After that, turn on the machine and release the clutch pedal at the same time until car like jumping. Do it that way several times.

When the canvas clutch is not strongly attached to the fly wheel, so in a way that is powerful enough to separate canvas sticky.

b. Push car
If the first way does not work, go do the second way, which is pushing the car back and forth. The first step, position the gear transmission in first gear when the car is pushed forward.

And vice versa, the position of the transmission gear in reverse gear R or if you want to push the car backwards. Do it the way it several times until the clutch is not sticky anymore.

"But you must remember, in ways that only applies to cars with manual transmission,